Epiphan Pearl Mini Live Video Production System - Manual (Page 155)

Pearl Mini User Guide Configure LDAP user authentication
Alternatively, you can regain access to Pearl Mini if you apply the factory default configuration preset using
the touch screen,
Apply a configuration preset using the touch screen . The factory default configuration will
change the current settings on Pearl Mini, see The Factory default configuration preset .
Configure LDAP user authentication
You can use the Lightweight Directory Access Protocol (LDAP) to authenticate users. Specify user roles by
using group DNs for users who log in as an Administrator, Operator, or as a Viewer.
The system has only one admin user and one operator. LDAP users must log in as either an admin or an
operator and do not have their own private profiles. Any LDAP users with the name admin, operator, or
viewer are ignored and the local accounts are used instead.
When enabled, LDAP authentication is an alternative to the regular system user names and passwords. You
may still login as admin , operator or viewer using the passwords for those accounts.
LDAP replaces the local viewer account instead of working side-by-side with it when LDAP is
enabled and the viewer account has no password (either there is no global viewer password
configured or the channel overrides the global password with a blank password). In this case, the
viewer must authenticate with LDAP and
cannot use the default viewer account with a blank
password to log in.
For security reasons, you should configure passwords for the local accounts. See Configure
LDAP user authentication .
These instructions assume you have a pre-configured LDAP server. The server must support anonymous
binding or have a special bind account with search access privileges. Note that Active Directory does not
support anonymous binding. LDAP referrals, restrictions and failovers are not supported.
To configure LDAP authentication:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
2. From the Configuration menu, select Security . The Security configuration page opens.
3. In the LDAP authentication section, check Enable LDAP authentication . Uncheck the check box
to disable LDAP authentication.
144