Epiphan Pearl Mini Live Video Production System - Manual (Page 105)

Pearl Mini User Guide Configure DHCP
4. Tap a segment of the IP Address (e.g. 192) to select it and use the keypad to enter a new static IP
address. Continue to enter your Network Mask, Default Gateway, and DNS server information. Tap
Apply when you're done.
The default gateway and DNS Server fields cannot be left blank. If you do not have a default
gateway or a DNS server for your network, enter the static IP address in those fields.
Configure DHCP
If you need to switch Pearl Mini from using static IP address allocation to using dynamic allocation with DHCP,
you can do this three different ways:
l
Restore factory settings, which clear all your custom settings. See Perform a factory reset .
l
Load a configuration preset file that uses DHCP networking. See Apply a configuration preset using the
Admin panel or Apply a configuration preset using the touch screen .
l
Change the network settings manually using either the touch screen or the Admin panel.
To manually select DHCP as the network type using the touch screen:
1. Tap the gear icon to open the System settings screen. If the control icons aren't showing, tap anywhere
on the touch screen.
2. Tap Network . The Network settings page appears. The currently enabled network type (DHCP or
static) is highlighted green.
3. Tap DHCP , and then tap OK to confirm.
94