Epiphan Pearl Mini Live Video Production System User Manual
Page 275
Pearl Mini User Guide
Change HTTP and RTSP streaming port values
For RTSP streaming directly to users on your LAN, the only information that's needed to view the broadcast is
the URL and the RTSP port number used to stream the broadcast.
HTTP port numbers are used for FLV and MPEG-TS streaming methods.
To set the HTTP and RTSP streaming ports for streaming to viewers on the local network:
1. Login to the Admin panel as
admin
.
2. From the Channels menu, select a channel and click
Streaming
. The Streaming page opens.
3. Set the
HTTP Streaming port
to specify the port used to stream the HTTP broadcast. This value along
with the URL is used by viewers to access the FLV and MPEG-TS streams.
The port number must be higher than 500 for HTTP. In the case of RTSP streaming this
value is ignored.
4. Set the
RTSP Streaming port
to specify which port to use when you are streaming live video via RTSP.
This value along with the URL is used by viewers to access the broadcast. The default for channel one is
554.
5. Click
Apply
.
264