Emerson Process Management ROSEMOUNT 5300 - Manual (Page 80)

Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
5-8
Standard Tank Shapes
Figure 5-4. Standard tank
shapes
Vertical Cylinder
Vertical Cylinder tanks are specified by
Diameter, Height, and Volume Offset.
Horizontal Cylinder
Horizontal Cylinders are specified by
Diameter, Height, and Volume Offset.
Vertical Bullet
Vertical Bullet tanks are specified by
Diameter, Height and Volume Offset.
The volume calculation model for this
tank type assumes that the radius of
the bullet end is equal to the
Diameter/2.
Horizontal Bullet
Horizontal Bullets are specified by
Diameter, Height, and Volume Offset.
The volume calculation model for this
tank type assumes that the radius of
the bullet end is equal to the
Diameter/2.
Sphere
Spherical tanks are specified by
Diameter and Volume Offset.
Diameter Height
Diameter
Height
Diameter Height
Diameter
Height
Diameter