Rosemount 5300 series, Reference manual – Emerson Process Management ROSEMOUNT 5300 User Manual
Page 297
Reference Manual
00809-0100-4530, Rev BA
July 2009
H-3
Rosemount 5300 Series
VOL_VOLUME_OFFSET
46
Use this parameter to add a volume to each calculated volume
value. The volume can for instance correspond to a sump volume
that you wish to add to your calculation.
VOL_STRAP_TABLE_LENGTH
47
Number of points to use in the strapping table.
VOL_STRAP_LEVEL
48
Strap value level 1-20 points
VOL_STRAP_VOLUME
49
Strap value volume 1-20 points
ECHO_REG
50
Read Echo distance, amplitude and class from gauge. The Echo
Distance is the distance from the reference echo to the target echo
calculated by the radar from the plot and gauge configuration.
ECHO_WRITE
51
Echo Found/False Record
PEP_STATUS
52
Probe End Projection Status
PEP_PRODUCT_DC_LIMIT
53
Probe End Projection Dielectric Constant Limit
PROBE_END_PULSE_POLARITY
54
USED_MAX_VAPOR_DC
55
REF_REFLECTOR_TYPE
56
Reference Reflector Type
VAPOR_DC_FILTER_FACTOR
57
Vapor Dielectric Constant Filter Factor
SIGNAL_QUALITY
58
MIN_SIGNAL_QUALITY
59
MAX_SIGNAL_QUALITY
60
TIME_SINCE_LAST_RESET
61
SURFACE_NOISE_MARGIN
62
Surface/Noise Margin
MIN_SURFACE_NOISE_MARGIN
63
Minimum Surface/Noise Margin
MAX_SURFACE_NOISE_MARGIN
64
Maximum Surface/Noise Margin
VAPOR_COMP_STATUS
65
Vapor Compensation Status
DEVICE_COMMAND
66
DEVICE_COMMAND_STATUS
67
RADAR_INTERNAL_TEMPERATUR
E_RANGE
68
MAX_PRESSURE
69
MAX_TEMPERATURE
70
MAX_VAPOR_DC
71
Maximum Vapor Dielectric Constant
MEAS_STATUS
72
Measurement Status
CENTERING_DISC
73
PEP_TRIM_EMPTY_FAILURE
74
Probe End Projection - Trim Empty Failure
PEP_TRIM_FILL_FAILURE
75
Probe End Projection - Fill Failure
PEP_RAW_PRODUCT_DC_EST
76
Probe End Projection - Raw Product Dielectric Constant
Estimation
PEP_RAW_DC_EST_USED_DISTA
NCE
77
USE_PROBE_END_PROJECTION
78
USE_STATIC_PRODUCT_DC
79
Use Static Product Dielectric Constant
CALCULATE_SIGNAL_QUALITY_M
ETRICS
80
USE_VAPOR_COMPENSATION
81
SPEC_CONFIG_PEP
82
Configure Probe End Projection
SPEC_CONFIG_VC
83
Configure Vapor Compensation
Parameter
Index
Number
Description