Emerson Process Management ROSEMOUNT 5300 - Manual (Page 123)

Reference Manual
00809-0100-4530, Rev BA
July 2009
6-3
Rosemount 5300 Series
Specifying Display Panel
Variables It is possible to specify the variables to be presented on the Display Panel
(LCD).
Using a Handheld Communicator
For a 375 Handheld Communicator, the LCD settings are available with:
HART command [2, 2, 3].
F OUNDATION Fieldbus parameters:
TRANSDUCER 1100>LCD_PARAMETERS.
Using Rosemount Radar Master (RRM)
The LCD tab in the General window lets you specify which variables to view
on the Display Panel screen:
1. Choose the General option from the Setup menu, or
click the General icon in the Device Configuration window.
2. Select the LCD tab.
Figure 6-2. RRM lets you specify
variables for the 5300 Display
Panel.
3. Select the variables to be shown on the display panel. The LCD will
alternate between the selected items.
The available LCD parameters are listed in Table 6-1 on page 6-6.
4. Click the Store button to save the LCD settings in the transmitter
database.
Device Config
General