beautypg.com

Safety messages -1, Rosemount 5300 series, Safety instrumented systems (4-20 ma only) – Emerson Process Management ROSEMOUNT 5300 User Manual

Page 177

background image

Reference Manual

00809-0100-4530, Rev BA
July 2009

Rosemount 5300 Series

www.rosemount.com

Section 8

Safety Instrumented Systems (4-20 mA only)

Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-1
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-3
Functional Specifications . . . . . . . . . . . . . . . . . . . . . . . . . page 8-4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-4
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-4
Operation and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . page 8-5
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-7
Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-7
Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8-7

SAFETY MESSAGES

Procedures and instructions in this section may require special precautions to
ensure safety of personnel performing the operations. Information that raises
potential safety issues is indicated by a warning symbol (

). Refer to the

following safety messages before performing an operation preceded by this
symbol.

Failure to follow these installation guidelines could result in death or serious
injury.

Make sure only qualified personnel perform the installation.

Use the equipment only as specified in this manual. Failure to do so may
impair the protection provided by the equipment.

Explosions could result in death or serious injury.

Verify that the operating environment of the transmitter is consistent with the
appropriate hazardous locations certifications.

Before connecting a HART

®

-based communicator in an explosive atmosphere,

make sure the instruments in the loop are installed in accordance with
intrinsically safe or non-incendive field wiring practices.

Electrical shock could cause death or serious injury.

Use extreme caution when making contact with the leads and terminals.