Emerson Process Management ROSEMOUNT 5300 - Manual (Page 47)

Reference Manual
00809-0100-4530, Rev BA
July 2009
3-17
Rosemount 5300 Series
Tri-Clamp Connection
Figure 3-13. Tri-Clamp tank
connection.
Tri-Clamp
Probe
Transmitter head
Gasket
Tank
1. Place a gasket on top of the tank flange.
2. Lower the transmitter and probe into the tank.
3. Fasten the Tri-Clamp to the tank with a clamp.
4. Loosen the nut that connects the transmitter
housing to the probe slightly.
5. Rotate the transmitter housing so the cable
entries/display face the desired direction.
6. Tighten the nut.
Nut
Clamp