Rosemount 5300 series, Reference manual – Emerson Process Management ROSEMOUNT 5300 User Manual
Page 212
Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
A-28
Code
Hazardous Locations Certifications
NA
No Hazardous Locations Certifications
E1
ATEX Flameproof
E3
NEPSI Flameproof
E5
FM Explosion-proof
E6
CSA Explosion-proof
E7
IECEx Flameproof
I1
ATEX Intrinsic Safety
IA
ATEX FISCO Intrinsic Safety
(8)
I3
NEPSI Intrinsic Safety
IC
NEPSI FISCO Intrinsic Safety
I5
FM Intrinsic Safety and Non-Incendive
IE
FM FISCO Intrinsic Safety
I6
CSA Intrinsic Safety
IF
CSA FISCO Intrinsic Safety
I7
IECEx Intrinsic Safety
IG
IECEx FISCO Intrinsic Safety
KA
ATEX, FM, CSA Flameproof/Explosion-proof
KB
ATEX, FM, IECEx Flameproof/Explosion-proof
KC
ATEX, CSA, IECEx Flameproof/Explosion-proof
KD
FM, CSA, IECEx Flameproof/Explosion-proof
KE
ATEX, FM, CSA Intrinsic Safety
KF
ATEX, FM, IECEx Intrinsic Safety
KG
ATEX, CSA, IECEx Intrinsic Safety
KH
FM, CSA, IECEx Intrinsic Safety
KI
FISCO - ATEX, FM, CSA Intrinsic Safety
KJ
FISCO - ATEX, FM, IECEX Intrinsic Safety
KK
FISCO - ATEX, CSA, IECEX Intrinsic Safety
KL
FISCO - FM, CSA, IECEX Intrinsic Safety
Code
Options
M1
Integral digital display
P1
Hydrostatic testing
(9)
LS
Long stud 9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
Standard height is 3.9 in (100 mm) for probes 5A and 5B; 5.9 in. (150 mm) for probes 6A and 6B.
T1
Transient Protection Terminal Block (standard with FISCO options)
BR
Mounting Bracket for 1.5 in. NPT Process Connection (RA)
(10)
U1
WHG Overfill Approval (pending, consult the factory)
Special Configuration (Software)
C1
Factory configuration (CDS required with order)
C4
Namur alarm and saturation levels, high alarm
C5
Namur alarm and saturation levels, low alarm
C8
Low alarm
(11)
(standard Rosemount alarm and saturation levels)
Special Certifications
Q4
Calibration Data Certification
Q8
Material Traceability Certification per EN 10204 3.1
(12)
QG
GOST Primary Verification Certificate
QS
Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output code H).