Emerson Process Management ROSEMOUNT 5300 - Manual (Page 189)

Reference Manual
00809-0100-4530, Rev BA
July 2009
A-5
Rosemount 5300 Series
Figure A-2. Maximum process
temperature and pressure
diagram for HTHP tank
connection.
Figure A-3. Maximum process
temperature and pressure
diagram for HP tank connection.
Figure A-4. Process
temperature and pressure
diagram for C tank connection
The HTHP, HP, and C versions have a ceramic tank seal, and graphite
gaskets - no O-rings are used. The final rating depends on flange selection.
A difference between the HP/C and HTHP coaxial versions is material for
some parts; PFA/PTFE for HP/C, and ceramics for HTHP. Ceramic spacers
allow for usage in applications with higher temperature.
The following table gives the temperature ranges for tank seal with different
O-ring material (applicable for the Standard Tank Connection):
Temperature
°F (°C)
Pressure psig (bar)
HTHP tank
connection
Temperature °F (°C)
Pressure psig (bar)
HP tank
connection
-200 (-129) -320 (-196)
Pressure psig (bar)
C tank
connection
Temperature °F (°C)