Emerson Process Management ROSEMOUNT 5300 - Manual (Page 221)

Reference Manual
00809-0100-4530, Rev BA
July 2009
A-37
Rosemount 5300 Series
(1) If a centering disc is required for a flanged probe the centering disc can be ordered with options CS or CP in the model code. If a centering disc is required
for a threaded connection or as a spare part it should be ordered using the item numbers listed below.
(2) To order a centering disc in a different material, consult the factory.
(3) 1½ in. NPT threaded connection (RA) is required.