HEIDENHAIN TNC 335 Technical Manual - Manual (Page 9)

10/94
TNC 360/TNC 335 Update Information No. 6 1-1
Update Information No. 6
New PLC Input/Output Unit PL 410 B
In December the PLC I/O unit PL 410 will be replaced by the PL 410 B.
The PL 410 B provides the same number of switching inputs/output as on the PL 410.
The connector layout is compatible with the PL 410. The dimensions have changed slightly
near the connections X15 to X22.
In contrast to the PL 410, the PL 410 B will be available in two versions. The following version
can be connected to the TNC 360:
PL 410 B Id.-Nr. 263 371 12
64 PLC inputs
31 PLC outputs
1 output “Control is operational“
The logic unit must be connected to the PL 410 B with a new connecting cable.
Connecting cable LE 360C/ PL 410 B: Id.-Nr. 289 111 ..
Max. 20 m