HEIDENHAIN TNC 335 Technical Manual - Manual (Page 53)

3-26
TNC 360 7 Visual Display Unit (VDU) 8/95
7 Visual Display Unit (VDU)
The LE 360 C is factory-prepared for connecting the BE 212 CRT screen or BF 110 flat panel display.
The status is indicated by the Id.-Nr. on the ID label (Id.-Nr. 270 641 for BE 212 and Id.-Nr. 270 642
for BF 110).
7.1 Connector assignment X10
Both display units are connected to the socket X9 on the LE 360 C, but with different cables.
X9 Visual display unit
D-sub connection (female 15-pin)
Pin Number BE 212 BF 110
1,8 0 V power supply –
2,4 + 12 V power supply –
3, 5, 6 Do not use Do not use
7 – Video
9 V SYNC V SYNC
10 H SYNC 1 –
11 0 V Signal 0 V Signal
12 – –
13 Video –
14 H SYNC 2
15 CLOCK
Housing Outer screen = Unit housing
The interface complies with the recommendations in VDE 0160, 5. 88 for separation from
line power.