HEIDENHAIN TNC 335 Technical Manual - Manual (Page 28)

2-6
TNC 360 3 Software 8/95
3 Software
The logic unit contains separate software for the NC section and the PLC section. The software is
identified by an 8-digit number.
After switching on the control, the NC and PLC software numbers are displayed on the screen. The
software number can also be directly requested with the aid of the MOD function.
3.1 NC Software
The 8-digit NC software number identifies the type of software, the dialogue language (language of
the country) and the software version.
Software-Typ
Landessprache
0 = deutsch
1 = tschechisch
2 = französisch
3 = italienisch
4 = spanisch
6 = schwedisch
7 = dänisch
8 = finnisch
9 = niederländisch
Software-Version
260 02 0 15
5 = portugiesisch
In addition to the above-listed languages, the TNC can always display English, which may be
selected via the machine parameter MP7230.
Software type
National language
Software version
0 = German
1 = Czech
2 = French
3 = Italian
4 = Spanish
6 = Swedish
7 = Danish
8 = Finnish
9 = Dutch