HEIDENHAIN TNC 335 Technical Manual - Manual (Page 305)

4-208
TNC 360 15 Tool Changer 8/95
S
→
S: Special tool follows Special tool
Marker 2601 can be used to set whether the special tool is to be returned to its original pocket
despite variable pocket coding.
The same logic diagram applies to single and double changing arms (M2600 = 0 and 1) with variable
pocket coding for special tools (M2601 = 0).
0
0
0
0
0
0
0
0
3RFNHW1R>QHZ6@ :
7RRO1R>QHZ6@
: