HEIDENHAIN TNC 335 Technical Manual - Manual (Page 351)

4/96
TNC 360 3 List of Machine Parameters 5-7
Machine
parameter Function and input Reaction /
CN 123 Page
MP410.3 Axis designation for axis 4
Input range: 0 to 5
0 = A
1 = B
2 = C
3 = U
4 = V
5 = W
RESET 4-12
MP710.0
to
MP710.3 Backlash compensation
Input range: –1.000 to +1.000 [mm] 4-21
MP711.0
to
MP711.3 Size of the reversal peaks in circular motion
Input range: –1.000 to 1.000 [mm] 4-22
MP712.0
to
MP712.3 Compensation value per control loop cycle time
Input range: 0.000 to 1.000 [mm] 4-23
MP720.0
to
MP720.3 Linear axis-error compensation
Input range:
– 1.000 to + 1.000 in [mm/m] 4-23
MP730 Non-linear axis-error compensation
Input range: 0 to 15
Bit 0 X axis +0 = not active
+1 = active
Bit 1 Y axis +0 = not active
+2 = active
Bit 2 Z axis +0 = not active
+4 = active
Bit 3 4th axis +0 = not active
+8 = active
4-27
MP810 Modulo value for display of the PLC axes
Input: 0.000 to 99 999999 [mm]
MP810.0 Axis X
MP810.1 Axis Y
MP810.2 Axis Z
MP810.3 Axis 4
4-35
MP910.0
to
MP910.3 Traverse range 1: Maximum value
Input range:
–99 999.999 to +99 999.999 [mm] or [°] 4-15
MP911.0
to
MP911.3 Traverse range 2: Maximum value
Input range:
–99 999.999 to +99 999.999 [mm] or [°] 4-15
MP912.0
to
MP912.3 Traverse range 3: Maximum value
Input range:
–99 999.999 to +99 999.999 [mm] or [°] 4-16