HEIDENHAIN TNC 335 Technical Manual - Manual (Page 306)

8/95
TNC 360 15 Tool Changer 4-209
If the special tool is to return to its original pocket despite variable pocket coding (M2601 = 1), there
is a different pocket number transfer sequence for single and double changing arms (M2600).
S
→
S, Single Changing Arm (M2600 = 0)
The pocket number of the old tool and tool number 0 are transferred first. Tool number 0 tells the
PLC to clear the spindle. After acknowledging with M2483, the pocket number and tool number of
the new tool are transferred.
0
0
0
0
0
0
0
0
3RFNHW1R>ROG6@3RFNHW1R>QHZ6@ :
7RRO1R7RRO1R>QHZ6@
: