HEIDENHAIN TNC 335 Technical Manual - Manual (Page 345)

4/96
TNC 360 5-1
Machine parameters – Contents 5
1 What is a Machine Parameter? 5-2
1.1 User parameters 5-2
2 Input/Output of Machine Parameters 5-3
3 List of Machine Parameters 5-4
3.1 Measuring systems and machines 5-4
3.2 Positioning 5-8
3.3 Operation with feed forward control 5-10
3.4 Operation with servo lag 5-10
3.5 Spindle 5-11
3.6 Integrated PLC 5-13
3.7 Setting the data interfaces 5-14
3.8 Measuring with a 3D touch probe 5-16
3.9 Digitizing with TS 120 (only with digitizing option) 5-16
3.10 Tapping 5-17
3.11 Display and operation 5-17
3.12 Machining and program run 5-21
3.13 Hardware 5-23