HEIDENHAIN TNC 335 Technical Manual - Manual (Page 349)

4/96
TNC 360 3 List of Machine Parameters 5-5
Machine
parameter Function and input Reaction/
CN 123 Page
MP32 Checking the edge separation of the measuring
system signals
Input range: 0 to 31
Bit 0 X axis +0 = not active
+1 = active
Bit 1 Y axis +0 = not active
+2 = active
Bit 2 Z axis +0 = not active
+4 = active
Bit 3 4th axis +0 = not active
+8 = active
Bit 4 S axis +0 = not active
+16 = active
4-9
MP40 VDU display
Input range: 1 to 15
Bit 0 X axis +0 = not active
+1 = active
Bit 1 Y axis +0 = not active
+2 = active
Bit 2 Z axis +0 = not active
+4 = active
Bit 3 4th axis +0 = not active
+8 = active
4-13
MP50 Controlled axes
Input range: 0 to 15
Bit 0 X axis +0 = not controlled
+1 = controlled
Bit 1 Y axis +0 = not controlled
+2 = controlled
Bit 2 Z axis +0 = not controlled
+4 = controlled
Bit 3 4th axis +0 = not controlled
+8 = controlled
4-74
MP60 PLC axes
Input: 0 to 15
Bit 0 Axis X +0 = normal NC axis
+1 = PLC axis
Bit 1 Axis Y +0 = normal NC axis
+2 = PLC axis
Bit 2 Axis Z +0 = normal NC axis
+4 = PLC axis
Bit 3 4th axis +0 = normal NC axis
+8 = PLC axis
4-35