H3C Technologies H3C SecPath F1000-E - Manual (Page 97)

87
Displaying and maintaining session management information
Task Remarks
Displaying session table
information
Display the session table information of the current virtual device.
Displaying session statistics
Task Remarks
Displaying global session
statistics
Display the global session statistics.
Enabling and disabling session
statistics collection
Enable or disable session statistics collection based on source/destination
security zone or source/destination IP address.
By default, the session statistics collection function is disabled.
IMPORTANT:
The session statistics collection function collects only information about traffic
occurring during the function is enabled.
Displaying session statistics per
IP address
Display session statistics based on the specified source or destination IP
address.
IMPORTANT:
Before performing this task, be sure to enable session statistics collection based
on source/destination IP address.
Displaying session statistics
based on security zone
Display session statistics based on the specified source or destination security
zone.
IMPORTANT:
Before performing this task, be sure to enable the session statistics collection
based on source/destination security zone.
Configuring basic session management settings
1. Select Firewall > Session Table > Configuration from the navigation tree.
The configuration interface appears as shown in
Figure 90 .