Configuring a service group resource – H3C Technologies H3C SecPath F1000-E User Manual
Page 67
57
ICMP message name
Type
Code
ttl-exceeded 11
0
Configuring a service group resource
1.
Select Resource > Service > Service Group from the navigation tree.
All existing service group resources are displayed.
Figure 58 Service group resource list
2.
Click Add.
The service group resource configuration page appears.
Figure 59 Service group resource configuration page
3.
Configure the parameters as described in
.
4.
Click Apply.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS