H3C Technologies H3C SecPath F1000-E User Manual
Page 181
171
Figure 140 Common configuration area
5.
Configure the common parameters for the RADIUS scheme as described in
.
Table 49 Configuration items
Item Description
Server Type
Select the type of the RADIUS servers supported by the firewall:
•
Standard—Specifies the standard RADIUS server. That is, the RADIUS client
and RADIUS server communicate by using the standard RADIUS protocol
and packet format defined in RFC 2138/2139 or later.
•
Extended—Specifies an extended RADIUS server (usually running on CAMS
or IMC). In this case, the RADIUS client and the RADIUS server communicate
by using the proprietary RADIUS protocol and packet format.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS