H3C Technologies H3C SecPath F1000-E - Manual (Page 162)

152
6. The user accesses the network resources.
7. The host requests the RADIUS client to tear down the connection and the RADIUS client sends a
stop-accounting request (Accounting-Request) to the RADIUS server.
8. The RADIUS server returns a stop-accounting response (Accounting-Response) and stops
accounting for the user.
RADIUS packet format
RADIUS uses UDP to transmit messages. To ensure smooth message exchange between the RADIUS
server and the client, RADIUS uses a series of mechanisms, including the timer management mechanism,
the retransmission mechanism, and the backup server mechanism. Figure 132 shows the RADIUS packet
format.
Figure 132 RADIUS packet format
Descriptions of the fields are as follows:
• The Code field (1 byte long) indicates the type of the RADIUS packet. Table 43 gives the possible
values and their meanings.
Table 43 Main values of the Code field
Code Packet type Description
1 Access-Request
From the client to the server. A packet of this type carries user
information for the server to authenticate the user. It must contain
the User-Name attribute and can optionally contain the attributes
of NAS-IP-Address, User-Password, and NAS-Port.
2 Access-Accept
From the server to the client. If all the attribute values carried in
the Access-Request are acceptable, the authentication succeeds,
and the server sends an Access-Accept response.
3 Access-Reject
From the server to the client. If any attribute value carried in the
Access-Request is unacceptable, the authentication fails and the
server sends an Access-Reject response.
4 Accounting-Request
From the client to the server. A packet of this type carries user
information for the server to start or stop accounting for the user.
The Acct-Status-Type attribute in the packet indicates whether to
start or stop accounting.
5 Accounting-Response
From the server to the client. The server sends a packet of this
type to notify the client that it has received the
Accounting-Request and has successfully recorded the
accounting information.