H3C Technologies H3C SecPath F1000-E User Manual
Page 147
![background image](https://www.manualsdir.com/files/813030/content/doc147.png)
137
[SecPath] radius scheme rs1
# Set the server type for the RADIUS scheme. When using the CAMS or IMC server, set the server
type to extended.
[SecPath-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[SecPath-radius-rs1] primary authentication 192.168.0.112
[SecPath-radius-rs1] primary accounting 192.168.0.112
[SecPath-radius-rs1] key accounting radius
[SecPath-radius-rs1] key authentication radius
[SecPath-radius-rs1] user-name-format without-domain
# Configure the IP address of the security policy server.
[SecPath-radius-rs1] security-policy-server 192.168.0.113
[SecPath-radius-rs1] quit
2.
Configure an authentication domain on the SecPath:
# Create an ISP domain named dm1 and enter its view.
[SecPath] domain dm1
# Configure AAA methods for the ISP domain.
[SecPath-isp-dm1] authentication portal radius-scheme rs1
[SecPath-isp-dm1] authorization portal radius-scheme rs1
[SecPath-isp-dm1] accounting portal radius-scheme rs1
[SecPath-isp-dm1] quit
# Configure dm1 as the default ISP domain for all users. Then, if a user enters the username without
the ISP domain at logon, the authentication and accounting methods of the default domain will be
used for the user.
[SecPath] domain default enable dm1
3.
On the SecPath, configure the ACL (ACL 3000 ) for resources on subnet 192.168.0.0/24 and the
ACL (ACL 3001) for Internet resources.
[SecPath] acl number 3000
[SecPath-acl-adv-3000] rule permit ip destination 192.168.0.0 0.0.0.255
[SecPath-acl-adv-3000] rule deny ip
[SecPath-acl-adv-3000] quit
[SecPath] acl number 3001
[SecPath-acl-adv-3001] rule permit ip
[SecPath-acl-adv-3001] quit
On the security policy server, specify ACL 3000 as the isolation ACL and ACL 3001 as the security
ACL.
4.
Configure extended portal authentication on the SecPath:
# Configure the portal server as follows:
{
Name: newpt
{
IP address: 192.168.0.111
{
Key: portal
{
Port number: 50100
{
URL: http://192.168.0.111:8080/portal.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS