H3C Technologies H3C SecPath F1000-E User Manual
Page 87
77
Figure 81 Deny all the other hosts' access to the external network during working time
•
Select Deny as the operation.
•
Select the time range worktime.
•
Click Apply.
# Configure the interzone policy group.
•
Select Firewall > Security Policy > Interzone Policy Group from the navigation tree to enter the
interzone policy group list page, as shown in
. Then click Add to enter the interzone policy
group configuration page.
Figure 82 Configure the interzone policy group
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS