H3C Technologies H3C SecPath F1000-E - Manual (Page 58)

48
Configuring a subnet address resource
Select Resource > Address > IP Address from the navigation tree, and click the Subnet tab to enter the
subnet address resource list page, as shown in Figure 45 . Then, click Add to enter the subnet address
resource configuration page, as shown in Figure 46 .
Figure 45 Subnet address resource list
Figure 46 Subnet address resource configuration page
Table 12 Configuration items
Item Description
Name
Specify the name for the subnet address resource.
IMPORTANT:
All resources (excluding the time range resources) must have unique names.
Description Describe the subnet address resource in brief.
IP/Wildcard Specify an IP address and a wildcard to define an address range.