Configuration consideration, Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 39
29
Figure 21 Network diagram
Configuration consideration
By default, the system has created the Trust, DMZ and Untrust zones, and you only need to configure
them and deploy them.
Configuration procedure
1.
Configure the Trust zone, and add interface GigabitEthernet 0/1 to the Trust zone:
a.
Select Device Management > Zone from the navigation tree.
b.
Click the
icon of the Trust zone.
DMZ
Untrust
Trust
SecPath
GE0/1
GE0/2
GE0/3
FTP server
WWW server
Internet
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS