Configuring service management – H3C Technologies H3C SecPath F1000-E User Manual
Page 24
14
Figure 13 Configuring an ACL rule to deny access of other hosts to SecPath on Saturday and Sunday
•
Select Deny as the operation.
•
Select time as the time range.
•
Select Source IP Address box and enter 192.168.1.0 and 0.0.0.255 in the following fields.
•
Click Apply.
# Configure an ACL rule to allow other hosts to access SecPath.
•
On the page displaying rules of ACL 2000, click Add.
Figure 14 Configuring an ACL rule to allow other hosts to access SecPath
•
Select Permit.
•
Click Apply.
NOTE:
The three ACL rules must be configured in the shown order.
Configuring service management
# Associate HTTP service with ACL 2000.
•
Select Device Management > Service Management from the navigation tree. Associate HTTP
service with ACL 2000.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS