H3C Technologies H3C SecPath F1000-E - Manual (Page 155)

145
• Set whether to enable IP address reallocation. Direct portal authentication is used in this example,
and therefore select No from the Reallocate IP list.
• Set whether to support the portal server heartbeat and user heartbeat functions. In this example,
select Yes for both Support Server Heartbeat and Support User Heartbeat.
Figure 126 Adding a portal device
# Associate the portal device with the IP address group.
As shown in
Figure 127 , click the icon in the Port Group Information Management column of device NAS
to enter the port group configuration page.
Figure 127 Device list
On the port group configuration page, click Add to enter the page shown in Figure 128 . Perform the
following configurations:
• Enter the port group name.
• Select the configured IP address group. The IP address used by a user to access the network must
be within this IP address group.
• Use the default settings for other parameters.