H3C Technologies H3C SecPath F1000-E - Manual (Page 232)

222
Figure 163 Adding an account for device management
Configuring SecPath
You can use either method to configure SecPath.
• Method 1:
You can configure the RADIUS scheme for SecPath in the Web interface and complete other
configurations at the CLI.
# Configure the IP address and security zone of each interface. (Details not shown.)
# Configure the RADIUS scheme system:
a. Select User > RADIUS from the navigation tree and then click Add in the RADIUS scheme list
area.
b. Configure basic information for the RADIUS scheme:
Enter system as the scheme name.
Select Extended as the server type.
Select With domain name for the username format.
c. In the RADIUS Server Configuration area, click Add to configure a RADIUS authentication
server for the scheme as follows:
Select Primary Authentication as the server type.
Enter 10.1.1.1 as the IP address of the primary authentication server.
Enter 1812 as the port.
Set expert as the key and confirm the key.