H3C Technologies H3C SecPath F1000-E User Manual
Page 173

163
Figure 137 AAA configuration procedure
Table 48 AAA configuration task list
Task Remarks
Required.
Complete at least one task.
Configuring RADIUS schemes in the Web
interface
Configuring HWTACACS schemes in the Web
interface
Configuring AAA
methods for ISP domains
Required.
Configuring ISP domain attributes
Optional.
Configuring AAA authentication methods for
Required.
Complete at least one task.
Configuring AAA authorization methods for an
ISP domain
Configuring AAA accounting methods for an
ISP domain
Forcibly tearing down user connections
Optional.
Configuring a NAS ID-VLAN binding
Optional.
Displaying and maintaining AAA
Optional.
NOTE:
To use AAA methods to control access of login users, you must configure the login authentication mode for
the user interfaces as scheme by using the authentication-mode command.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS