H3C Technologies H3C SecPath F1000-E - Manual (Page 178)

168
Configuring user group attributes
User groups simplify local user configuration and management. A user group comprises a group of local
users and has a set of local user attributes. You can configure local user attributes for a user group to
implement centralized user attributes management for the local users in the group. Configurable user
attributes include password control attributes and authorization attributes.
By default, every newly added local user belongs to the system default user group system and bears all
attributes of the group. To change the user group to which a local user belongs, use the user-group
command in local user view.
To configure attributes for a user group:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a user group and enter
user group view.
user-group group-name N/A
3. Configure password control
attributes for the user group.
• Set the password aging time:
password-control aging
aging-time
• Set the minimum password
length:
password-control length length
• Configure the password
composition policy:
password-control composition
type-number type-number
[ type-length type-length ]
Optional.
By default, the global settings
apply, including a 90-day
password aging time, a minimum
password length of 10 characters,
and at least one password
composition type and at least one
character required for each
password composition type.
The minimum password length is 8
characters.
In FIPS mode, the value of the
type-number argument must be 4.
4. Configure the authorization
attributes for the user group.
authorization-attribute { acl
acl-number | callback-number
callback-number | idle-cut minute
| level level | user-profile
profile-name | vlan vlan-id |
work-directory directory-name } *
Optional.
By default, no authorization
attribute is configured for a user
group.
5. Set the guest attribute for the
user group.
group-attribute allow-guest
Optional.
By default, the guest attribute is not
set for a user group, and guest
users created by a guest manager
through the Web interface cannot
join the group.