Method 1: configuring an interzone policy rule – H3C Technologies H3C SecPath F1000-E User Manual
Page 82
72
Figure 73 Network diagram
Method 1: Configuring an interzone policy rule
# Create a periodic time range from 8:00 to 18:00 on working days (from Monday through Friday).
•
Select Resource > Time Range from the navigation tree, and then click Add.
Figure 74 Configure a time range
•
Type worktime in the Name field.
•
Select the Periodic Time Range box.
•
Set the start time to 8:00.
•
Set the end time to 18:00.
•
Select the Mon., Tues., Wed., Thurs., and Fri., boxes.
•
Click Apply.
# Create an IP address resource.
•
Select Resource > Address > IP Address from the navigation tree, and then click Add.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS