H3C Technologies H3C SecPath F1000-E - Manual (Page 44)

34
Configuring service management
1. Select Device Management > Service Management from the navigation tree.
The service management configuration page appears.
Figure 25 Service management
2. Configure service management as described in Table 9 .
3. Click Apply.
Table 9 Configuration items
Item Description
FTP
Enable FTP
service Specify whether to enable the FTP service.
The FTP service is disabled by default.
ACL
Associate the FTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button in
front of FTP.
Telnet
Enable Telnet
service Specify whether to enable the Telnet service.
The Telnet service is disabled by default.
SSH
Enable SSH
service Specify whether to enable the SSH service.
The SSH service is disabled by default.
SFTP
Enable SFTP
service
Specify whether to enable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP
Enable HTTP
service Specify whether to enable the HTTP service.
The HTTP service is disabled by default.
Port Number
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.