Verilink 8100A (34-00237) Product Manual User Manual
Page 82

4-8
8 0 0 0 S e r i e s
Figure 4.10
SDSL Configuration Menu
NOTICE:
The options you see on the SDSL Configuration menu depend on the
specific DSLAM.
Toggle SDSL Mode
(CPE or CO)
To select CPE or CO Mode, follow the steps below.
1
Type “1” on the SDSL Configuration menu (Figure 4.10). The IAD
displays the current SDSL Mode and prompts you to change it.
2
Type “1” to select CO, or type “2” to select CPE. The IAD sets the mode
and redisplays the SDSL Configuration menu.
NOTICE:
The CO Mode is reserved for testing. CPE is the normal mode.
Set SDSL Speed to
Auto Cycle (Nokia)
To select Auto Cycle - Nokia DSLAM, type “2” on the SDSL Configuration
menu to set the SDSL speed to Auto Cycle for connecting to a Nokia
DSLAM.
The IAD saves the configuration and redisplays the SDSL Configuration
menu.
Set SDSL Speed to
Auto Sense (Copper
Mountain)
To select Auto Sense
− Copper Mountain DSLAM, type “3” on the SDSL
Configuration menu (Figure 4.10) to set the SDSL speed to Auto Sense for
connecting to a Copper Mountain DSLAM. The IAD saves the configuration
and redisplays the SDSL Configuration menu.
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual