Verilink 8100A (34-00237) Product Manual - Manual (Page 235)

C o m m a n d L i n e I n t e r f a c e 6-15
framerelay | atm
Keyword identifying datalink protocol.
set wan
framerelay dlci
Sets the Frame Relay DLCI number and encapsulation type to RFC1490 or
RFC1483. If you do not enter any optional parameters, it finds the first
available slot, interface, and port.
set wan framerelay dlci (1490|1483)
[ [ []]]
dlci-number
DLCI value (16
− 1023; default is 32 for data and 33 for voice).
1490 | 1483
Encapsulation keyword.
set wan ip
address
Sets the WAN IP address. If you do not enter any optional parameters, it finds
the first available slot, interface, port and connection.
set wan ip address [priority]
[ [ [ []]]]
ip-address
IP address in decimal format (999.999.999.999).
net-mask
Subnet mask in decimal format (255.255.255.255).
set wan rip Enables and disables RIP on a WAN IP port. If you do not enter any optional
parameters, it will find the first available slot, interface and port.
set wan rip (off|(on (1|2Bcst|2Mlti)))[
[ []]]
off | on
Keyword to disable (off) or enable (on) RIP on the specified port.
1 | 2Bcst | 2Mlti
Keyword identifying version to implement.
set wan stp
bridge
Enables and disables Spanning Tree Protocol on the specified WAN port.
set wan stp bridge (off|on) [ [
[]]]
off | on
Keyword to disable (off) or enable (on) Spanning Tree Protocol on the
specified WAN port.
show
configuration
Displays the current configuration. Use optional parameter “file” to
display the config.st file.
show configuration [file]