Verilink 8100A (34-00237) Product Manual User Manual
Page 244
7-6
8 0 0 0 S e r i e s
IAD is improperly
provisioned at the
voice gateway
Incorrect network
provisioning
Incorrect directory
number at the Class 5
switch
Verify and correct
provisioning of IAD as
required (refer to page 5-2).
Check and correct network
provisioning at DSLAM,
network switches, etc.
Check and correct as required
Cannot receive or send data
Incorrect PVC/DLCI
set for data channel
Verify these settings:
VPI: 0 to 255
VCI: 0 to 65535
DLCI: 16 to 1023
(default PVC 0/38; DLCI 32)
View Interface (page 5-13)
and Media statistics
(page 5-22) to check the pack
receive and send status.
Incorrect network
setup
Check and correct network
setup as necessary.
If IAD is configured as a router:
Incorrect or missing
LAN or WAN IP
address
Ensure that both the LAN and
WAN IP addresses are
configured.
Incorrect or missing
default static route
Review the routing table and
correct as necessary
(page 5-31).
Incompatible RIPv1
Check and correct subnet
masks (255.255.255.0)
Update RIPv1 to RIPv2.
If IAD is configured as a bridge:
Incorrect bridging
parameters
Review IAD configuration
(page 5-2) and current bridge
status (page 5-32).
Correct as necessary
Incorrect connection
Ensure the IAD is connected
to another bridge
Missing peer or
converter
Install a converter to convert
1483 cells to Ethernet packets.
Symptom
Probable Cause
Corrective Action
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual