High pots port rear panel connectors, High pots port rear panel connectors -8 – Verilink 8100A (34-00237) Product Manual User Manual
Page 34

1-8
8 0 0 0 S e r i e s
High POTS Port Rear Panel Connectors
The High POTS Port rear panels have the following connectors:
10/100 LAN
,
CONSOLE
,
T1 (or DSL, depending on model)
,
DCE V.35/RS-530 (USI)
,
BATTERY BACKUP
,
Voice Lines
,
LIFE LINE
,
On/Off Switch
,
and AC POWER
INPUT.
Each of these is described below. Each unit also has a
Ground,
a
typical
diagram of which is shown in Figure 2.1.
Figure 1.8
T1/E1 High POTS Port Rear Panel Connectors
Figure 1.9
SDSL and SHDSL High POTS Port Rear Panel Connectors
10/100 LAN
(10/100Base-T
Ethernet Port)
Connects the IAD to the local area network using a CAT-5 straight-through
Ethernet cable, or directly to a PC for accessing via Telnet (using a
cross-over, customer-supplied cable). The data interfaces connect through the
IAD supporting IEEE 802.1-compliant bridging and routing. When configured
for routing, supports Routing Information Protocol (RIP) version 1, version 2,
or static IP routing. The IAD complies with RFC-1812 when interfacing with
IPV4 routers. The IAD can terminate the following data interfaces:
•
ATM data transport via SHDSL, SDSL, and T1/E1 per RFC 1483 or RFC
2364
•
Frame Relay data transport via SDSL and T1/E1 per RFC 1490
DCE LINK
Illuminates when there is a link between the IAD and data
communications equipment (DCE).
DCE ACT
Illuminates or blinks when there is activity on the DCE link.
LED
Description
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual