Verilink 8100A (34-00237) Product Manual - Manual (Page 140)

4-66 8 0 0 0 S e r i e s
Figure 4.76 Manual ATM Pace Control Menu
Ensure that you have set the IAD configuration parameters to match those of
the voice gateway. Each option on this menu is described in detail below.
Manual ATM Pace Control
1 Type “P” on the Manual ATM Pace Control menu to enable or disable pace
control.
2 Type “E” to enable pace control, or “D” to disable pace control.
Audio Bit Rate Margin
1 Type “A” on the Manual ATM Pace Control menu to set the audio bit rate
margin.
2 Enter the new bit rate margin (0 to 50) and press Enter. (Zero (0)
implements automatic audio bit rate.)
Set Minimum Signaling Bit Rate
1 Type “M” on the Manual ATM Pace Control menu to set the audio bit rate
margin.
2 Enter the new bit rate margin and press Enter.
Statistics
Type “S” on the AAL2/LES Call Control menu to display the AAL2/LES
Statistics menu: