Verilink 8100A (34-00237) Product Manual - Manual (Page 57)

A d m i n i s t r a t i o n 3-7
Enable/Disable SNMP via IP
To Enable or Disable SNMP via IP, follow the steps below.
1 Type “E” on the SNMP Configuration menu to enable or disable SNMP via
IP. The IAD displays the current status of SNMP.
2 To enable SNMP, type “E” or “D” to disable. The IAD saves the
configuration (if changed).
3 Continue with other SNMP settings, or press Escape to return to the Main
menu.
4 Reset the IAD.
Enable/Disable SNMP via EOC
To Enable or Disable SNMP via EOC, follow the steps below.
1 Type “F” on the SNMP Configuration menu to enable or disable SNMP via
EOC. The IAD displays the current status of SNMP.
2 To enable SNMP, type “E” or type “D” to disable. The IAD saves the
configuration (if changed).
3 Continue with other SNMP settings, or press Escape to return to the Main
menu.
4 Reset the IAD.
Enable SNMP via Both IP and EOC
To Enable SNMP via Both IP and EOC, follow the steps below.
1 Type “A” on the SNMP Configuration menu to enable SNMP via IP and
EOC. The IAD saves the configuration.
2 Continue with other SNMP settings, or press Escape to return to the Main
menu.
3 Reset the IAD.
Disable SNMP via Both IP and EOC
To Disable SNMP via both IP and EOC, follow the steps below.
1 Type “B” on the SNMP configuration menu to disable SNMP via IP and
EOC. The IAD saves the configuration.
2 Continue with other SNMP settings, or press Escape to return to the Main
menu.
3 Reset the IAD.
Configure System Contact
To configure the System Contact, follow the steps below.