Display dhcp entry details – Verilink 8100A (34-00237) Product Manual User Manual
Page 169
C o n f i g u r a t i o n
4-95
For the IAD to display this information, you must attach DHCP Client
devices that use DHCP to obtain an IP address from the IAD.
Display DHCP Server Assigned and Unassigned
Addresses
Type “A” on the DHCP Server Configuration menu to display DHCP Server
Assigned Addresses, or type “U” to display DHCP Server Unassigned
Addresses. The IAD displays the following information about the DHCP
Server assigned addresses:
For the IAD to display this information, you must attach DHCP Client
devices that use DHCP to obtain an IP address from the IAD.
Display DHCP Entry Details
Type “D” on the DHCP Server Configuration menu to display DHCP entry
details. The IAD displays the following information about the DHCP entries:
acks sent
nacks sent
requests for other servers
protocol errors
Field
Description
IP
IP address of the device, assigned by the IAD.
Client ID
Ethernet MAC address for the device.
Status
How the IP address is assigned to the device—via DHCP
or manually.
Value
Description
IP address
IP address of the device.
Client ID
Ethernet MAC address for the device.
Status
how the IP address is assigned to the device—via DHCP
server, or manually.
Subnet
IP subnet mask; number of bits reserved for host ID.
Gateway
IP address of packets sent to destination.
Lease
length of time to keep the Internet connection active.
Type
type of IP address: static or dynamic.
Name
name of the device.
TFTP server
IP address of the TFTP server
1st DNS server
IP address of the 1st DNS server
Statistics
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual