Verilink 8100A (34-00237) Product Manual - Manual (Page 212)

5-28 8 0 0 0 S e r i e s
discarded, RX error: No. of discarded packets due to the following reasons:
- Could not allocate packet buffers
Rx Clock glitch Total frames discarded on this port due to receives
clock glitch errors
PLL error Total frames discarded on this port due to receives
phase lock loop errors
Frame too long Total frames discarded on this port because the
received frame was too long
Non octet aligned Total frames discarded on this port because the
received frame was not an integral no. of octets
Abort seq No. of frames aborted on the port due to receiving an
abort sequence since system re-initialization and the
port state was ‘up' or 'test'
CRC error Total frames discarded on this port due to received
CRC errors
Rx overrun Total frames discarded on this port due to receiver
overruns errors
CD lost Total frames discarded on this port due to lost Carrier
Detect
Out Of Buffers (PCBs) No. of times that could not allocate a packet buffer for
received packets
Lack of resources Discarded received packets because a PCB for
Transmitted/Received Pool Buffers could not be
allocated
bytes sent No. of Data sent in bytes
packets sent No. of packets sent
discarded, TX ring full No. of packets discarded because Transmitted Ring
Pool is full
discarded, bad pkt or link not
ready Discarded received packets due to:
- The status of the interface is not online
- Transmitted packet length is larger than interface
discarded, TX error No. of outgoing packet being discarded due to clock
glitch and other transmission errors
Tx Clk glitch Total frames discarded on this port due to transmitter
clock glitch errors
Tx underrun No. of times that there are no packets waiting in the
Transmitted Ring Buffer
CTS lost Total frames discarded on this port due to transmitter
CTS lost errors
Parameter Description