Verilink 8100A (34-00237) Product Manual - Manual (Page 210)

5-26 8 0 0 0 S e r i e s
Display G2237 xDSL Statistics (85xx)
This report shows xDSL status indicators.
Near-End CRC Last Number of seconds of cyclic redundancy check error
counts
Near-End CRC Last Number of minutes of cyclic redundancy check error
counts
Failure Counters Overall Total overall failure frames
Local SEF Count of local (near-end) severely errored frames
Local LOS Count of local (near-end) loss of signal frames
Remote SEF Count of remote (far-end) severely errored frames
Remote LOS Count of remote (far-end) loss of signal frames
ADSL Standard Current status of the ADSL standard in use
Parameter Description
Operational State Current operation state
Start Progress Current start progress
Operational Seconds Total operation time in seconds
Up/Down Counter No. of times modem has come up
Received SNR No. of SNR (Signal-to-Noise Ratio) received
Mean SQ Error No. of mean SQ error used to compute received signal
to noise ratio
Initial Received SNR Level of the Initial Received SNR (Signal-to-Noise
Ratio)
Loop Attenuation Current level of Loop Attenuation
Actual PSD Mask Actual PSD mask is used for the line code comparison.
It is acknowledged that an optimized PSD mask can be
decided only after line code decision is made. The
transmit power back-off of remote HTU
Framer Sync Current framer synchronization status: In-Sync / Out of
Sync
LOSW Status Current status of LOSW (Loss of Sync Defect): ON /
OFF
Total Seconds Total seconds of statistics gathering
Parameter Description