Verilink 8100A (34-00237) Product Manual - Manual (Page 211)

R e p o r t s 5-27
Display Serial (USI) Statistics
(8216s/8224s/8316s/8324s/8512s/8516s/8524s)
Type “S” to display the Serial Statistics report. This report displays basic
serial (HDLC) transport statistics on the Universal Serial Interlace port.
Errored Seconds Total errored seconds received of CRC and LOSW
errors found
CRC Count No. of CRC errors (near end) received
LOSW Defect Count No. of LOSW Defect (Loss of Sync Defect) errors
received
FEBE Count No. of Far End Block Error Count (far end)
Tip/Ring Current status of Tip/Ring: Normal / Reserved
Transmit Power Nominal transmit power
Receiver Gain Current no. of total receiver gain
SHDSL
Remote Country Code Current Remote Country Code
Remote Provider Code Current Provider Code
H.DSL2
Remote HDSL2 Version Current version of the Remote HDSL2
Remote Country Code Current Remote Country Code
Provider Code Current Provider Code
Remote Vendor Data Low Remote vendor provided data (the low 4 bytes)
Remote Vendor Data Hi Remote vendor provided data (the high 4 bytes)
Data Mode Heartbeat Total Data Mode Heartbeat received (Handle Modem
Data state)
Framer Sync Lost Tick No. of time that framer synchronization was lost
Parameter Description
bytes rcvd Total data received in bytes
packets rcvd No. of serial packets received
discarded, RX Busy No. of discarded received packets due to packets
Overrun
Available Buffers (PCB
Entries) Current available internal PCB (Packet Buffers) entries
Parameter Description