Display nat local server table, Display nat alias table, Clear nat statistics – Verilink 8100A (34-00237) Product Manual User Manual
Page 182

4-108
8 0 0 0 S e r i e s
Display NAT Local Server Table
When NAT is enabled, you can display the entries in the local server table.
1
To display the table, type “O” on the NAT Configuration menu.
2
Press any key to return to the NAT Configuration menu.
Display NAT Alias Table
When NAT is enabled, you can display the entries in the NAT alias table. To
display the table, type “E” on the NAT Configuration menu. Press any key to
return to the NAT Configuration menu.
Clear NAT Statistics
When NAT is enabled, type “K” on the NAT Configuration menu to clear all
NAT statistics.
Type
TCP or UDP
Seconds since use
Idle time in seconds for the connection
TCP/UDP Sequence
TCP sequence number
Ack
TCP ack number
State
TCP state number (TCP only)
Retrys: local, foreign:
local—TCP retransmissions from local device to foreign
device.
foreign—TCP retransmissions from foreign device to
local device.
Bad checksum: local,
foreign
local—packets with bad TCP checksums from local
device.
foreign—packets with bad TCP checksums from foreign
device.
Report Entry
Description
Entry
Table entry number
Local IP Address
IP address in use
Local Port
local port number
Internet Port
Internet port number
Protocol
The protocol used—TCP or UDP
Report Entry
Description
Entry number
Table entry number (1 to 7)
Local IP Address
Local, or LAN IP address
Internet IP Address
Internet IP address assigned
Report Entry
Description
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual