Verilink 8100A (34-00237) Product Manual - Manual (Page 31)

I n t r o d u c t i o n 1-5
Figure 1.5 ADSL Low POTS Port Rear Panel Connectors
Figure 1.6 SHDSL Low POTS Port Rear Panel Connectors
POWER (DC Power
Adapter)
Connects the IAD to any AC 100-240 V outlet (adapter included).
Console (RS-232 Serial
Port)
Connects the IAD to a PC using a straight-through nine-pin serial (DB-9)
cable, for the purpose of using a terminal emulator for IAD configuration and
management.
10/100LAN
(10/100Base-T
Ethernet Port)
Connects the IAD to the local area network using a CAT-5 straight-through
Ethernet cable, or directly to a PC for accessing via Telnet (using a
cross-over, customer-supplied cable).
LINE 1-8 (Telephone
Interfaces)
Supports eight analog telephones via RJ-11 POTS ports.
LIFE LINE Provides access to a telephone line when there is no power or voice gateway
to the IAD. Refer to Life Line Connection on page 2-12 for a description of
which unit uses which port for the Life Line connection.
NOTICE: The 8108 also uses the WAN connection for the Life Line connection.
WAN Connects through WAN interface as follows:
• 8208
− T1/E1 (uses an RJ-48 connector)
• 8308/8304
− SDSL (uses an RJ-11 connector)
• 8108/8104
− ADSL (uses an RJ-11 connector).