Verilink 8100A (34-00237) Product Manual - Manual (Page 230)

6-10 8 0 0 0 S e r i e s
set nat server
add
Configures the NAT local server.
set nat server add
(ESP|AH|((TCP|UDP) ))
index
Index used on the NAT server table.
local-ip-address
Local IP address.
ESP | AH | TCP | UDP
Protocol used for traffic across the NAT port.
local-port
Local IP port.
network-port
Port on the server that defines which TCP or UDP port is used.
set nat server
remove
Removes the NAT server.
set nat server remove
index
Index used on the NAT server table.
set password Sets the password for the IAD.
set password (user | netman | supervisor)
user | netman | supervisor
Password level.
password
Password for the IAD.
set pots admin Sets the administration status of the POTS ports as set in the SIP
configuration menu.
set pots admin (|all) (off|on)
port |all
Selects which POTS ports to change.
off | on
Disables (off) or enables (on) the port.
set pots gain Changes the gain on the POTS port.
set pots gain (|all) (tx|rx)
port | all
Selects which POTS ports to change.
tx | rx
Sets transmit or receive gain for the POTS port.