Verilink 8100A (34-00237) Product Manual - Manual (Page 183)

C o n f i g u r a t i o n 4-109
Delete IP Address from NAT Tables
To delete an entry from the NAT Tables, follow the steps below.
1 Type “X” on the NAT Configuration menu. The IAD prompts for the IP
address.
2 Type the IP address to delete and press Enter. The IAD updates the table,
and displays the NAT Configuration menu.
Delete NAT Local Server Entry
To delete a local server entry, follow the steps below:
1 Type “Y” on the NAT Configuration menu. The IAD prompts for the entry
number to delete.
2 Type the number of the table entry and press Enter. The IAD displays the
following:
Deleting NAT Local Server entry 1, Translated IP address
115.3.3.1
Translated Port 2, Standard Port 3
The IAD updates the table, and displays the NAT Configuration menu.
Delete NAT Alias Entry
To delete a NAT alias entry, follow the steps below.
1 Type “Z” on the NAT Configuration menu. The IAD prompts for the alias
entry to delete.
2 Type the number of the entry and press Enter. The IAD updates the table,
and displays the NAT Configuration menu.
Setting PPP Options
The PPP Options menu globally configures PPP options for the PPP interfaces
configured in the IAD. To access these PPP options, follow the steps below.
1 Select “Q” on the Main menu (Figure 2.2) to display the PPP Configuration
menu (Figure 4.115).
Figure 4.115 PPP Configuration