Verilink 8100A (34-00237) Product Manual - Manual (Page 187)

R e p o r t s 5-3
Telnet Server Port port number of the Telnet server
DNS Server IP Address IP address of the DNS server
DNS Server Timeout current timeout value in seconds (5 to 20)
Application Information loaded program files
Support File Information loaded support files
Interface type SDSL | T1/E1 | ADSL | SHDSL | Ethernet
Admin state Status: enabled | disabled
Physical state online | offline
WAN DataLink Protocol Totally Transparent | Raw HDLC | Cisco
compatible HDLC | IP-Plus compatible HDLC |
PPP (over Raw HDLC) | ATM | Frame Relay
xDSL Type SHDSL Annex A (U.S.) | SHDSL Annex B
(Europe)
ADSL Standard for Startup T1.413 | G.LITE | G.DMT | A;cate; 1.4 |
Multi-Mode | ADI | ALCATEL
SHDSL Mode Customer Premises Equipment (CPE) or Central
Office (CO)
SDSL Mode Customer Premises Equipment (CPE) or Central
Office (CO)
Firmware Version version of firmware
Line Rate Auto | Fixed | 1152 kbps | 768 kbps | 384 kbps |
192 kbps | 2320 kbps or manually set
Payload Scrambling enabled | disabled (ATM only)
Frame Relay Management maintenance protocol (Frame Relay only)
T1/E1 Only
T1 Frame Mode ESF | D4
E1 Frame Mode FAS | FASC (CRC4 enabled) | Multi-Frame CAS
| Multi-Frame CAS (CRC4 enabled
Binary 8 Zero Substitution (B8ZS) enabled | disabled
Line Build Out Distance in feet: 0 to 133 | 133 to 266 | 266 to 399
| 399 to 533 | 533 to 655 | -7.5 dB | -15 dB | -22.5
dB
Tx Clock Source external | internal
Channels Enabled
HDB3 coding enabled | disabled
Payload Scrambling enabled | disabled
Port #
Sa4 Bit set | cleared
Sa5 Bit set | cleared
Sa6 Bit set | cleared
Parameter Description