Verilink 8100A (34-00237) Product Manual User Manual
Page 245

T r o u b l e s h o o t i n g a n d D i a g n o s t i c s
7-7
The table below lists the IAD provisioning parameters on the voice gateway
that identifies the IAD and affects its performance. Verify these parameters
when troubleshooting the IAD.
Parameter
Description
ID
Identification number of the IAD (read only)
Serial Number
IAD serial number (read only). Same as MAC Address
Profile Name
IAD profile name
Interface Group
Interface Group that will deliver the subscriber’s calls.
ATM Protection Group
ATM Protection Group to which the IAD is assigned.
VPI
Virtual Path Identifier that identifies the
subscriber-specific logical path between the voice
gateway and the ATM network.
VCI
Virtual Circuit Identifier that identifies the
subscriber-specific virtual circuit between the voice
gateway and the ATM network (VCI must be specific
− between 32 and 1023).
Transport
ATM or Frame Relay
Signaling
Loop Start or Ground Start
Compression
No compression, 32k, or 16k
Echo Cancellation
On or off
Admin
Service state of IAD: locked or unlocked
Operational
State of IAD (read only)
- 8108 Series IAD (34-00339.B) Product Manual 8508 Series IAD (34-00339.B) Product Manual 8208 Series IAD (34-00339.B) Product Manual 8308 Series IAD (34-00339.B) Product Manual 7500p Series IAD (34-00334.B) Product Manual 7200p Series IAD (34-00334.B) Product Manual 7000 Series (34-00334) Product Manual